Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 415

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Inspect
Direct Station
Selector
Drop
Group Calling
Hold
Last Number Dial
Paging
Saved Number Dial
Transfer
Inspect can display limited information, such as extension number, label,
and number of messages, for each DSS button. To use Inspect, an
operator presses the Page button for the range of extensions, then the
Inspct button, and then the DSS button for an extension. Inspect must be
activated separately for each page on the DSS; to inspect another page,
an operator presses the Home button and repeats the process.
When an operator inspects a DSS button associated with an extension,
Line 1 of the display shows the extension, the label associated with the
extension, if any, and the number of messages that have been left for that
extension, if any. It the extension has posted a message, Line 2 shows
the posted message.
In Release 2.0 and later systems, an operator can inspect a DSS button
with a red LED on to see whether the extension is busy or using Do Not
Disturb. If the user at the extension has turned on Do Not Disturb, the Do
Not Disturb message is posted and appears on the operator's display.
However, the message may sometimes mean that the user has posted
the message without turning on the Do Not Disturb feature.
If a user presses the Drop button while active on a call with Inspect
activated, the system cancels Inspect and attempts to activate the Drop
feature.
Any MLX telephone user can inspect the number of calls in the calling
group queue by pressing the Inspct button and then pressing a button
programmed with the calling group's extension, the Calls-in-Queue Alarm
button. The display shows the label associated with the calling group and
the number of calls in the queue.
If a user presses the Hold button while active on a call with Inspect
activated, the system cancels Inspect and tries to put the call on hold.
Starting with Release 2.0, if a programmed Last Number Dial button is
inspected, the display shows the last number stored for dialing. If no
number is stored, only the feature name is displayed.
If a user receives a voice-announced inside call or a group speakerphone
page while using the Inspect feature, the Inspect feature is canceled and
the user is returned to the Home screen.
Starting with Release 2.0, if a programmed Saved Number Dial button is
inspected, the display shows the last number stored for dialing. If no
number is stored, only the feature name is displayed.
If a user with Inspect activated tries to transfer a call by pressing the
Transfer button while active on a call, Inspect is canceled and the user is
returned to the Home screen.
Issue 1
August 1998
Page 366