Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 706

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
System Access/Intercom Buttons
Night Service
Paging
Park
Personal Lines
Pickup
Primary Rate
Interface and T1
Privacy
Recall/Timed Flash
Reminder Service
Ringing Options
Night Service calls override any Ring Timing options (Delay Ring or No
Ring) programmed for an SA button and ring immediately. On a Shared
SA button, however, Night Service calls follow the programmed option
(Immediate Ring, Delay Ring, or No Ring).
Announcements using Speakerphone Paging can be made from a
Shared SA button. However, users cannot join a page (as they can other
calls) on a Shared SA button.
When a user parks a call made or received on an SA button, Shared SA
buttons do not ring when the parked call returns.
When a call on a personal line button is transferred to another user, the
call rings on an SA or ICOM button. The LED next to the personal line
flashes rapidly to indicate that the call is on hold for transfer. If the call is
answered at an SA or ICOM button, the LED next to the personal line
lights steadily. If a user shares the personal line appearance and answers
the call by using the personal line button, the call is removed from the SA
or ICOM button.
An inside call ringing at an SA or SSA button can be answered at another
telephone. All associated SA or SSA buttons are cleared.
T1 lines must not be shared between voice and data extensions with
Shared SA buttons. The lines are programmed for either voice-only or
data-only service.
If Privacy is turned on at a telephone with a Shared SA button, other
users, including the principal extension and other corresponding SSA
buttons, cannot join a conversation on the SSA button. If Privacy is turned
on after another user joins the conversation, it does not affect that person,
but no additional users can join the conversation.
Recall can be used on a ringing or answered inside call made on an SA
or ICOM button. When the user is listening to a busy signal, Recall has no
effect.
On a call at an SA button, either the principal user or another person who
has joined the call on a Shared SA button can use the feature. In Release
2.0 and later systems, Recall can be used on an SA button during an
outside call made or received on a loop-start line.
Reminder calls do not ring at SSA buttons.
Ring Timing options (Immediate Ring, Delay Ring, No Ring) cannot be
programmed for SA Originate Only or ICOM Originate Only buttons
because they do not ordinarily receive calls.
Incoming calls on a Shared SA button ring with the personalized ringing
pattern programmed for the telephone with the button (not for the
principal extension).
The principal extension of Shared SA buttons can use Send Ring. This
feature overrides Delay Ring programmed for any telephones with
Shared SA buttons for the principal extension. When a call arrives for the
principal extension while it is busy, the Shared SA buttons ring
immediately.
Issue 1
August 1998
Page 657