Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 295

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Directories
Personal Lines
Pools
Recall/Timed Flash
Saved Number Dial
Second Dial Tone
Timer
Speed Dial
UDP Features
A System or Personal Directory can be used to dial numbers on a
personal line. An Extension Directory is used only for inside calls and
cannot be used to dial calls on a personal line.
When a pool dial-out code is included in the telephone number for a
Personal or System Directory listing, a Pause character may be needed
following the pool dial-out code, depending on the local telephone
company. Pause characters are entered by pressing the Hold button.
Press the Conf button to enter the Flash special character in a Directory
listing telephone number.
Saved Number Dial does not store numbers dialed by using a Directory.
Marked System Speed Dial entries, which do not display, are not affected
by the Second Dial Tone setting. If the central office does not immediately
supply dial tone when a star code is entered and a marked System Speed
Dial entry uses star codes, the appropriate number of pauses (each 1.5
seconds) must be programmed after each star code in the entry.
System Speed Dial numbers are stored in the System Directory. MLX
display telephone users can dial one by selecting the name from the
display. If the number is on a marked System Directory listing, select the
listing; you can dial it despite any calling restrictions (toll or outward)
assigned to your extension.
In Release 6.0 and later systems (Hybrid/PBX mode only), non-local
extensions cannot be included in a local Extension Directory. non-local
extensions can be included in Personal and System Directories.
You cannot use a non-local system's System Directory to make calls.
Issue 1
August 1998
Page 246