Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 542

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Primary Rate Interface (PRI) and T1
At a Glance - Continued
Factory Settings
continued
Link layer address or TEI
assigned
PRI Dial-Plan Routing
Table
Service value
Digits for each pattern
Digits in Called Party
Number
Digits to add
T1 Dial-Plan Routing
Table
Expected Digits
Digits to delete
Digits to add
Tandem PRI Trunks*
B-channels assigned to
group
Type of network service
for the B-channel group
Copy telephone number to
send from telephone
number assigned
* Release 6.0 and later systems only: When the switch type is set to LEGEND-Ntwk or LEGEND-PBX, these
settings are made automatically and cannot be changed unless the switch type is changed. You can add or
remove B-channels from the assigned B-channel group.
Description
The MERLIN LEGEND Communications System supports two types of service for
Digital Signal Level 1 (DS1) facilities: T1 and PRI.
T1 service transmits and receives voice and analog data as well as digital data
services in Release 4.0 and later releases.
The Integrated Services Digital Network (ISDN) PRI is a standard access
arrangement that can be used to connect the system to a network providing voice
and digital data services.
0 (range 0–63)
Empty
Blank
0
Blank
Blank
0
Blank
All
ETN (Electronic Tandem Network)
Copy
3 1
Issue 1
August 1998
Page 493