Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 602

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Queued Call Console (QCC)
The factory settings can be changed so that each type of call is either directed to
a different and/or additional QCC or is not directed to any of the QCC operator
positions. In addition, if the QCC queue is assigned to be a Group Coverage
receiver, and if no QCC operator is assigned to receive calls for the coverage
group, the coverage calls go to the primary QCC operator position.
If the caller dials
On a DID trunk
On a tandem trunk (Release 6.0 or later systems only)
On a dial-in tie trunk
Dialed by a remote access user and not programmed to ring at a QCC
extension
On other types of lines, the caller hears an error tone.
If returning calls are not directed to a QCC operator position, the caller hears
normal ringback, Music On Hold, or silence, and is not made aware by any special
audible feedback that the call is not returning to the queue for further handling.
Programming an operator to receive DID calls to invalid destinations (unassigned
extension numbers) does not cause the calls to ring into the QCC queue, unless
the QCC queue is also programmed as the backup extension.
QCC Queue Priority
The QCC queue priority determines the priority of calls programmed to ring into
the QCC queue. A priority value from 1 up to 7 is assigned; this value determines
the order in which calls are sent to QCCs. A value of 1 is the highest priority and 7
is the lowest. The factory-set priority level is 4 for all call types and lines/trunks.
The values can be changed for each line/trunk and each call type, according to
the order in which calls should be answered. Call types are as follows:
Dial 0
Forward/Follow Me
Unassigned DID
LDN
Returning
Group Coverage
QCC extension
For example, if important customer calls are received on particular lines/trunks, a
priority value of 1 should be programmed so that the calls are answered before
any others. Values of 2 through 7 should be assigned to lines or call types used
for less important calls. Careful planning of QCC queue priority assures prompt
answering of all important business calls.
or the LDN, the caller hears a fast busy tone if the call is:
Issue 1
August 1998
Page 553
3 9