Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 414

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Inspect
If Inspect is activated and someone makes a voice-announced call or a group
page to the user, the Inspect feature is canceled and the Home screen is
displayed.
Pressing the Feature, Menu, or Home button while Inspect is being used cancels
Inspect.
If a user is active on a call while using Inspect and presses a fixed-feature button
(for example, the Hold, Transfer, or Drop button), the system cancels Inspect
and attempts to activate the feature.
Telephone Differences
Direct-Line Consoles
Inspect cannot be used on analog Direct-Line Consoles (DLCs).
Queued Call Consoles
When a conference participant joins a conference by using a shared personal line
or Shared SA button, the Queued Call Console (QCC) display is updated to
include this participant. However, if a QCC operator uses the Inspect feature to
verify the number of participants, the number shown on the display does not
include participants joining the conference on the Shared SA or personal line
button.
If a QCC operator presses any of the buttons programmed with fixed QCC
features (for example, a Call, Start, or Source button) while in Inspect mode, the
console remains in Inspect mode. However, if an operator presses the Feature,
Transfer, HFAI, Conf, Mute, Drop, Speaker, or Hold button, the console is
removed from Inspect mode.
Other Multiline Telephones
Inspect is available only on MLX display telephones.
Single-Line Telephones
Inspect cannot be used on single-line telephones.
Feature Interactions
Alarm
Conference
Inspect can be used on an MLX DLC or a QCC to display the number of
system alarms.
If a user presses the Conf button while Inspect is active, the system
cancels Inspect and tries to activate the Conference feature.
2 4
2 4
2 4
2 4
2 4
2 4
Issue 1
August 1998
Page 365