Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 333

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Extension Status
To change the status of a telephone, a DLC operator or supervisor activates
Extension Status (if not already active) and then presses a programmed button for
Status 0, Status 1, or Status 2, and finally presses the Auto Dial or DSS button for
the telephone. A DLC operator or supervisor can also change the status of
telephones by pressing the Feature button, dialing the feature code (
Status 0,
DSS button for the extension.
NOTE:
MLX display telephone users see only the first three characters dialed (for
example,
In either Hotel or Calling Group/CMS mode, regular multiline telephone users can
change to Status 1 or Status 2 by pressing a programmed button for each status,
or by pressing the Feature button and dialing the feature code (
Ã
for Status 2). In Calling Group/CMS mode only, a user can change to Status 0
by pressing the Feature button and dialing
Single-Line Telephones
A single-line telephone user can change to Status 1 (CMS or Hotel only) or
Status 2 by lifting the handset, which must be connected to an ICOM or SA line,
and dialing either
mode only, a user can change to Status 0 by dialing
Feature Interactions
Allowed/
Disallowed Lists
and Calling
Restrictions
Callback
Direct Station
Selector
Display
Do Not Disturb
Group Calling
à for Status 1, and
) when changing the status of telephones.
Ã
for Status 1 or
To allow users in Hotel mode to dial emergency or other selected
numbers when the telephone is in Status 1 or 2, access must be assigned
to an Allowed List.
In Hotel mode, an extension in Status 1 or 2 cannot use Callback to
request busy pools.
A calling group or CMS supervisor, or a DLC with Extension Status
assigned can change the status of a group member or room by pressing a
programmed Available or Unavailable button and then pressing the DSS
button for the group member or room.
See "Display" on page
The LED next to an Auto Dial or DSS button is on when the user activates
Do Not Disturb or is busy on a call. In Release 2.0 and later systems, an
MLX operator can inspect the DSS button to see if a Do Not Disturb
message is posted.
Extension Status allows calling group supervisors to change and monitor
calling group member status and to enable group members to sign in and
out of the calling group.
à for Status 2), and pressing the Auto Dial or
.
Ã
for Status 2. In Calling Group/CMS
2 1
247.
Issue 1
August 1998
Page 284
à for
Ã
for Status 1 or
.