Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 448

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Integrated Administration
Ringing Options
System
Renumbering
Transfer
The total of the value programmed for Delay Ring and the value
programmed for Coverage Delay Interval should be less than either the
transfer return time or the VMS transfer return interval. These values are
shown on the Application Switch Defaults screen.
System renumbering can be done only through system programming.
Integrated Administration never sends system numbering information to
the system.
Both the transfer return time and the VMS transfer return interval should
be greater than the total of the value programmed for Delay Ring and the
value programmed for the Coverage Delay Interval. These values are
shown on the Application Switch Defaults screen.
See "Integrated Administration in Release 4.1 and Later Systems" on
page 369 for information about setting the transfer return time and the
VMS transfer return interval in Release 4.1 and later systems.
Issue 1
August 1998
Page 399