Lucent Technologies Attendants Required - Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
I Applications
Lucent Technologies Attendant
Platform Requirements
To connect Lucent Technologies Attendant to the system, you need the following
equipment:
Lucent Technologies Attendant unit
A 6-wire modular telephone cord
A 012 module (and ring generator, if the module has the apparatus code
517F13). Current 012 modules [apparatus code 517G13 (28) or
higher-letter or lower letter] include a built-in ring generator and work with
all releases of the system.
The number of Lucent Technologies Attendants that the system requires depends
on the number of incoming lines/trunks and the number of busy-hour calls. One is
normally sufficient for handling after-hours calls only and for delayed (secondary)
call handling.
Technologies Attendant for primary (immediate) call handling.
Table 63.
Number of
Attendants Required
NOTE:
The system may require additional TTRs to allow a 012 or 016 (T/R)
module to handle a large number of voice connections. Two TTRs
are provided on the 012 module and four are provided on the
016 (T/R) module. For guidelines on TTR needs, see
I–19.
Table 63 shows the requirements when you program Lucent

Lucent Technologies Attendants Required

Incoming
Lines/Trunks
2
3
4 10 to 12
6 2
Busy-Hour Calls
1 to 6
7 to 9
August 1998
Page I-23
Table 62, page
1 to 25
25 to 50
50 to 100
Issue 1