Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 760

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Uniform Dial Plan Features
At a Glance - Continued
System Programming
continued
Maximums
UDP Routing Patterns
UDP Routes
UDP FRL
UDP Digit Absorption
UDP Added Digits
Number of digits in
non-local dial plan
extension number range
Factory Settings
Display Preference
Switch Identifier
UDP FRL
UDP Absorbed Digits
UDP Added Digits
NOTES:
1. This topic only summarizes information about private networks.
2. DEFINITY ECS and DEFINITY ProLogix Solutions features and
3. When a network consists of more than two systems, a coordinating
Description
In Release 6.0 and later systems (Hybrid/PBX mode only), MERLIN LEGEND
Communications Systems can be networked with one another, or with DEFINITY
ECS or DEFINITY ProLogix Solutions systems, in private networks. This section
describes how the system is set up and used for one aspect of private networks,
non-local dial plan extensions, including the following topics:
Intersystem calling between extensions located at different systems in a
private network
When SMDR is set to record both incoming and outgoing
calls, specify how private networked trunk calls should be
recorded (for Release 6.1 and later systems):
20 (range 1–20)
4 (range 1–4)
6 (range 0–6)
11 (range 0–11)
20 (any digits 0–9)
4 (2- and 3-digit numbers also supported)
Calling number
No value; facility not networked
3
0
0
Detailed information is included in the Network Reference.
operations are beyond the scope of this guide. This book discusses the
network from the MERLIN LEGEND Communications Systems'
perspective.
system manager should act as a coordinator for all changes to private-
network systems' dial plans, non-local dial plans, ARS routing, UDP
routing, and remote access. Otherwise, the two system managers
should plan together and agree upon any changes that are made
subsequently.
More
4 8
Issue 1
August 1998
Page 711
Dial line/trunk no.