Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 431

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Integrated Administration
Extension. The extension displayed (nnnn) is the one entered in the
Extension Directory screen.
Add User to AUDIX Voice Power Cover Group. Press
select
On initial installation only, this information is passed to the Subscriber
screen for AUDIX Voice Power or AUDIX Voice Power/Fax Attendant. This
screen is used for programming the applications only. If a user
subsequently changes this field, the change is not passed to the
Subscriber screen. This allows two choices to be set independently: the
item on the AUDIX Voice Power User or AUDIX Voice Power/Fax
Attendant User screen, which controls the addition of the extension to the
coverage group; and the item on the Subscriber screen, which specifies
whether AUDIX Voice Power does supervised or unsupervised transfers to
the extension. See the AUDIX Voice Power or Fax Attendant System
Manager's Guide for details.
AUDIX Voice Power Button Number. Enter a button number (1–34) for an
Auto Dial button on the telephone at the extension for the Automated
Attendant calling group. If the specified button is already programmed as a
personal line or Pool button, or if it is the only SA or ICOM button on the
telephone, the Auto Dial button is not programmed. The Auto Dial button
can replace any other button that is already programmed, including an SA,
Shared SA, or ICOM button.
The Auto Dial button programming does not appear in the application
database. As a result, if a user returns to this screen, Integrated
Administration does not show the button or prevent the programming of a
different button with the same Auto Dial number. To determine which
buttons are programmed on an extension, use Inspect at the telephone or
from centralized telephone programming.
If the Auto Dial button is to be programmed for the calling group number for
Call Answer or Voice Mail, it must be reprogrammed on the system through
either extension programming or centralized telephone programming.
If the user leaves this field blank or enters , no button is programmed.
Private Fax Extension. The user can enter either the system extension of
a tip/ring jack connected to a fax machine or a phantom extension. The
extension is added (on the system) to the coverage group that sends its
calls to AUDIX Voice Power. If the user leaves this field blank or blanks it
out, the extension in the Extension field does not receive Fax Attendant
services.
Unless a DID line is assigned to an extension for private fax purposes, a
personal line must be assigned to the extension, and the extension must
be the principal user of that line.
or .
Issue 1
August 1998
Page 382
( ) and