Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 710

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
System Renumbering
Whenever an extension number is renumbered, the original extension
number is available for use.
The reserved system-assigned extension numbers (shown in Figures 44,
45, and 46) must be assigned new extension numbers before the original
numbers can be used for anything else.
The system offers three local numbering plans:
2-Digit
3-Digit
Set Up Space
Each of the plans allows renumbering of all or selected extensions (single or
block). The system numbering plans, with the numbers they automatically assign,
are shown in Figures
NOTE:
Figures
Extensions can be renumbered to any number shown in the white spaces.
2-Digit Numbering Plan
The 2-digit numbering plan is the factory setting. This plan is designed for
companies that do not anticipate a need for more than 50 extensions in the next
one or two years.
Figure 44
numbers in
equipment, jack, or feature to which they are assigned is indicated within the row.
44 through
44 through 46 show the default settings in the gray spaces.
shows the numbers automatically assigned by the system. The
Figure 44 are arranged in rows according to the first digit. The type of
46 and are described in the next three sections.
4 2
Issue 1
August 1998
Page 661