Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 362

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Group Calling
At a Glance - Continued
System Programming
continued
Assign maximum number of calls allowed in calling group
queue (Release 6.0 and later systems):
More
Dial calling group ext. no.
allowed in queue
Select hunt type, Circular, Linear, or Most Idle (Release 5.0
and later systems):
More
Designate delay announcement device. In Release 5.0 and
later systems, designate as many as ten primary delay
announcement devices and one secondary device, set
interval between the first and second announcements, and
specify whether second announcement repeats:
More
Calling group as receiver for a Group Coverage sender:
More
Assign message-waiting receiver for calling group:
More
Select/set overflow basis and/or threshold and designate
calling group or QCC queue as overflow receiver:
More
group no./QCC
, or
later systems)
Choose calling group type to determine whether calling group
members are automatically logged in after a system restart.
When a calling group is used for voice messaging systems,
specify whether VMI type is integrated or generic:
More
Set calls-in-queue alarm threshold; in Release 5.0 and later
systems, specify up to three alarm levels to signal increasing
number of callers waiting:
More
Set the overflow threshold time:
More
Group No.
Assign external alert to notify calling group members of
calls-in-queue alarm:
More
Enter display label for calling group:
More
Issue 1
August 1998
Page 313
More
Dial no. of calls
calling
,
(Release 6.0 and
Calling