Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 471

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Messaging
Table 29.
See "Labeling" on page 400
messages.
Users with MLX display telephones can post a message by pressing the Menu
button, selecting
message, and selecting
Users with analog multiline, MLX-5, or MLX-10 nondisplay telephones must use
programming code
message, press the programmed Posted Messages button; the green LED next to
the button flashes. Then dial the code for the desired message; the LED next to
the button becomes steady. To cancel a posted message, press the programmed
Posted Messages button and dial
NOTE:
The system can automatically post and remove messages for a non-
display telephone only if a Posted Messages button has been programmed
for that telephone.
In Release 2.0 and later systems, when the Do Not Disturb feature is turned on,
the system automatically posts the Do Not Disturb message. This message
appears on the Home screen of an MLX display telephone that has Do Not
Disturb turned on. The message also appears on the screen of a display
telephone used by an inside caller to call the extension that has Do Not Disturb
activated. The system automatically removes the Do Not Disturb message when
the user turns off the feature. On analog multiline, MLX-5, or MLX-10 nondisplay
telephones, the Do Not Disturb message is not posted automatically unless the
telephone has a programmed Posted Messages button.
A user can post or remove a Do Not Disturb message by pressing a programmed
Posted Messages button. However, this does not turn the Do Not Disturb feature
on or off.
Posted Messages
for more information about creating posted
[
.
to program a Posted Messages button. To post a
] from the display, selecting the desired
; the green LED next to the button turns off.
Issue 1
August 1998
Page 422