Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 230

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Coverage
Call Waiting
Camp-On
Centralized Voice
Messaging
Conference
CTI Link
Digital Data Calls
Direct Station
Selector
Direct Voice Mail
Display
A call to a sender with Call Waiting turned on goes to Individual and/or
Group Coverage first. If all coverage points are busy, the sender receives
the call-waiting tone.
Coverage calls answered by any receiver can be camped on to another
user.
For Release 6.1 and later systems (Hybrid/PBX mode only), calls
received by a MERLIN LEGEND system without a VMS can be sent by
coverage to a centralized VMS located on another MERLIN LEGEND
system.
Conference calls can be originated from a Cover button only when the
user with a caller on the Cover button presses the Transfer button, dials
the number for another person, and then presses the Conf button to
complete the transfer. In this case only, instead of the call being
transferred, a conference call with three participants (including the
originator) is established.
When an extension is programmed as a CTI link, it is removed from
membership in coverage groups.
When a call is transferred from a programmed Cover button on an
unmonitored DLC, screen pop is not initiated at the destination extension,
even if it is using a CTI application.
Individual Coverage is not recommended for 2B data calls. Because a
coverage receiver can have only one Cover button for each coverage
sender, only a 1B data call arrives at the receiver. The second call of a 2B
call continues to ring at the coverage sender.
Coverage delays do not apply to data calls. Calls ring immediately.
When a system operator transfers an Individual or Group Coverage call
and the call returns, the red LED next to the DSS button for the sender
does not flash as it does for a transfer return for calls received on other
types of line buttons.
Direct Voice Mail overrides coverage-inhibiting features such as
Coverage Off, Coverage VMS Off, and Coverage Inside Off.
When an Individual or Group Coverage call is answered by a receiver
with a display telephone,
sender's name, if programmed, or extension number. The display also
shows the reason why the call went to coverage:
On an MLX telephone, other reasons why calls are sent to coverage are
also shown:
. The receiver sees the caller information by pressing the
More button.
is shown for the call type, followed by the
à or Ã
Issue 1
August 1998
Page 181
, , or .