Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 533

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Pools
Lines/trunks assigned to pools cannot be assigned as personal lines (on buttons)
on any extension except a DLC. However, calls that come in on lines/trunks
assigned to pools can be programmed to be received by one or more QCC
operators.
When all lines/trunks in a pool are in use, the green LEDs turn on next to the Pool
buttons assigned to multiline telephones and next to any DSS buttons associated
with the pool dial-out code.
Individual extensions can be restricted to deny dial access to particular pools. See
"Calling Restrictions" under
Users with Pool buttons on their telephones can use the pool even if the pool
dial-out restriction is assigned to the extension.
In Release 6.0 and later systems, all private network trunks must be assigned to
pools.
In Release 6.0 and later systems, users should not be given dial-access or Pool
button access to private networked trunks.
One pool can be assigned to buttons on a maximum of 64 extensions.
In Release 3.1 and later systems, if an extension is changed from a Direct-Line
Console to a Queued Call Console, pool dial-out codes are disallowed on the
QCC. You must use system programming if you want to allow access to dial-out
codes on the QCC.
Mode Differences
Although pools are available only in Hybrid/PBX mode, users in Behind Switch
mode can access the pools on the host system through their prime lines.
"Feature Interactions" on page
3 1
Issue 1
August 1998
Page 484
485.