Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 703

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
System Access/Intercom Buttons
Data/Video Workstations
Shared SA buttons should not be assigned to video workstations.
Feature Interactions
Auto Answer All
Auto Answer
Intercom
Automatic Line
Selection
Automatic Route
Selection
Callback
Caller ID
When Auto Answer All is activated, incoming calls on SA Ring, ICOM
Ring, SA Voice, or ICOM Voice buttons can be answered automatically
by the device connected to a General Purpose Adapter (GPA).
If SSA buttons are assigned, they should be programmed for either Delay
Ring or No Ring, and the corresponding SA button at the principal
extension should be programmed for Immediate Ring. This prevents calls
to the principal extension from being answered simultaneously at the
principal extension and at another device with a corresponding Shared
SA button.
Voice-announced calls received at an analog multiline telephone are not
answered by a device connected through a GPA because ringing current
is not sent to the device.
When the Auto Answer Intercom feature is activated, a Hands-Free Unit
(HFU) cannot be used to answer calls on a Shared SA button.
SA buttons (including Shared SA buttons) or ICOM buttons can be
programmed as part of an ALS sequence. You should not interleave
different button types (personal line, Pool, SA, or ICOM). For example, in
Hybrid/PBX or Key mode, the sequence might include all SA or ICOM
buttons first, then Pool, then personal line buttons.
When a call is made on a Shared SA button, the ARS FRL that applies is
the level programmed for the telephone with the button, not the level for
the principal extension.
Callback can be used on an SA or ICOM button. When Callback is used
on an SSA button, the callback call from the system rings (and the LED
next to the button flashes) only at the telephone that originated Callback.
If a user other than the person originating Callback selects a Shared SA
button with a queued callback request and lifts the handset, the user
hears the queuing tone, and the green LED on the originator's telephone
goes from flashing to on. If the user hangs up, the green LED on the
originator's telephone goes back to flashing and the system directs the
callback call to the originator. If the user does not hang up, the system
directs the callback call to the user and not to the callback originator.
Both SA and Shared SA extensions display Caller ID information on
Line 1 of the first screen of the display. This information remains on the
answering extension's display and is cleared from the other extensions. If
another user picks up on the call, that person sees
principal extension user sees the caller information of the person who
picked up; it is displayed on Line 2 of the first screen.
4 2
4 2
Issue 1
August 1998
Page 654
and the