Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 350

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Forward and Follow Me
Queued Call Consoles
Calls cannot be forwarded from a QCC to another extension or an outside
number. (A QCC operator uses Position Busy instead.) However, users can
forward calls to an individual QCC.
To turn on Follow Me for another local extension at a QCC, press the Feature
button and select the Follow Me feature from the display. At the prompt, dial the
local extension of the forwarding telephone.
To cancel Forward and Follow Me from other local extensions, press the Feature
button at the destination QCC, and select
the display. Then do one of the following:
To cancel forwarding from one local extension, dial that extension number.
To cancel forwarding from all local extensions, dial .
NOTE:
Forward from non-local extensions must be cancelled at the extension
forwarding the calls.
Other Multiline Telephones
To forward calls to an extension, either press a programmed Forward button and
dial the destination extension number, or press the Feature button, dial
dial the destination extension number. If you are forwarding to a non-local
extension, dial a pound sign (#) after the non-local extension number. If you are
off hook on an SA or ICOM button, you hear a confirmation tone (double break in
dial tone), and then dial tone is removed. If a programmed Forward button is used,
the green LED next to the button turns on.
To forward calls to an outside telephone number, either press a programmed
Forward button, or press the Feature button and dial
line/trunk or pool on which to route forwarded calls by dialing the ARS or pool
dial-out code (Hybrid/PBX mode only), the Idle Line Access code (usually ; Key
and Behind Switch modes only), the line/trunk number (usually 801–880), or
(Centrex line, any mode). If you are using Centrex Transfer via Remote Call
Forwarding, you may need to press the Hold button to enter a 1.5-second Pause
character; consult your Centrex provider. Press Hold at any time after entering the
dial-out code, line/trunk number, or . Then dial the destination telephone number
followed by a pound sign ( ) to signal the end of the dialing sequence.
If you are off hook on an SA or ICOM button, you hear a confirmation tone, and
then dial tone is removed. If a programmed Forward button is used, the green
LED next to the button turns on.
To turn on Follow Me, press the Feature button, dial
telephone's extension. If you are off hook on an SA or ICOM button, you hear a
confirmation tone and dial tone is removed. An MLX display telephone user can
Issue 1
August 1998
Page 301
(Cancel Follow Me) from
, and
. Then select the outside
, and dial the forwarding