Programming Mdc 9000 And Mdw 9000 Telephones - Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
D General Feature Use and Telephone Programming
Telephone Programming
Table 53.

Programming MDC 9000 and MDW 9000 Telephones

Step
1 Label the button to be
programmed.
Note: Skip this step if the feature
will not be programmed onto a
button.
2 Begin programming.
3 Select the feature or setting.
4 End programming.
Action
Remove the clear label cover from the telephone by
pulling up on the tab that extends from the top of the
cover.
Write the feature name on the card next to the
button to be programmed.
Replace the cover.
Press the imprinted Feat button.
.
Dial
Press the button you labeled.
Note: If the feature does not get programmed onto a
button, press any line button. This does not affect
the button in any way.
Dial the programming code.
The feature is programmed.
Press the imprinted Feat button.
Dial .
Issue 1
August 1998
Page D-16