Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 620

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Recall/Timed Flash
2. A single-line telephone user without a Recall or Flash button, or with
3. A single-line telephone user who has a 2500 YMGL or 8110M
Feature Interactions
Allowed/
Disallowed Lists
and Calling
Restrictions
Auto Dial
Automatic Route
Selection
Barge-In
Basic Rate Interface
Callback
Call Waiting
buttons that activate telephone-only features, must press and release
the switchhook to send a timed flash.
telephone with positive disconnect on cannot press the switchhook to
activate features. The user must press the Hold button or the Flash
button to activate a feature. (The 8100M telephone must have positive
disconnect programmed on the telephone as described in its manual.)
If Recall is used on a personal line or Pool button—or, in Release 2.0 and
later systems, on an SA or ICOM button—to access an outside loop-start
line, the accessed line is kept, the user hears outside dial tone, and
calling restrictions are reapplied.
The Conf button is used to enter the Flash special character, which
simulates pressing the Recall button, in a telephone number
programmed on an Auto Dial button.
If Recall is used during an inside call made on an Auto Dial button, the
call is disconnected and the user hears inside dial tone.
In Release 2.0 and later systems, Recall can be used on an ARS call.
Recall cannot be used during dialing. When dialing is complete, pressing
the Recall button sends a timed flash to the host, the accessed line is
kept, the user hears outside dial tone, and calling restrictions are
reapplied.
In Release 1.0 and 1.1 systems, Recall cannot be used on an ARS call
because the call is made on an SA button.
In Release 2.0 and later systems, Recall can be used by either party on a
call joined using Barge-In.
In Release 1.0 and 1.1 systems, Recall cannot be used with Barge-In.
Recall is not recognized by the CO on BRI lines. Thus, the CO ignores a
press of the Recall button.
If Recall is used while a user is off hook with a queued callback request,
the call is disconnected and the user hears dial tone.
If Recall is used while a user is hearing special ringback, the call is
disconnected and the user hears inside dial tone.
3 9
Issue 1
August 1998
Page 571