Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 203

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Coverage
At a Glance - Continued
Factory Settings
Extensions
Coverage
Coverage Inside
Coverage VMS
Group Coverage Ring
Delay (4.1 and later
systems)
Primary Cover Ring
Delay (4.1 and later
systems)
Secondary Cover Ring
Delay (4.1 and later
systems)
Systemwide
Delay Ring Interval (4.0
and prior systems)
Coverage Delay Interval
(4.0 and prior systems)
Secondary Coverage
Delay Interval
Retry Timing Interval
Operator
QCC Queue Priority for
coverage group
QCC operator to receive
calls for coverage group
Description
Coverage allows a call ringing at one extension (a sender ) to ring at another
extension (a receiver ) at the same time and to be answered at either extension. It
is not necessary for the sender and receiver to have shared personal lines or
Shared SA buttons. A coverage sender, whose calls are covered, can be an
individual extension ( Individual Coverage ) or a group of extensions ( Group
Coverage ).
An extension becomes a sender and has its calls covered in either or both of the
following ways:
An Individual Cover button is programmed for the sender on the multiline
telephone of a receiver.
The sender is made a part of a coverage group through system
programming. A receiver for the group is programmed in any of the
following ways:
— A Group Cover button is programmed for the group on a multiline
On
On (inside and outside calls covered)
On (inside and outside calls covered by VMS)
3 rings (range 1–9)
2 rings (range 1–6)
2 rings (range 1–6)
2 rings (range 1–6)
3 rings (range 1–9)
2 rings (fixed)
5 seconds (fixed)
4 (range 1–7)
Primary system operator
telephone (a receiver).
3
Issue 1
August 1998
Page 154