Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 353

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Forward and Follow Me
Allowed/
Disallowed Lists
and Calling
Restrictions
Authorization Code
Auto Answer All
Auto Dial
Automatic Route
Selection
Barge-In
A user with an outward- or toll-restricted telephone cannot forward calls to
an outside number unless the number is on an Allowed List assigned to
the restricted extension. No error tone sounds when a user with a
restricted telephone uses Remote Call Forwarding or Centrex Transfer
via Remote Call Forwarding (Release 6.0 and later systems). However,
when a call eligible for forwarding is received, the system checks
restrictions and denies the forward if the outside telephone number is not
on an Allowed List (or is on a Disallowed List) assigned to the restricted
extension.
In Release 6.0 and later Key or Hybrid/PBX mode systems, forwarding
features, including Centrex Transfer via Remote Call Forwarding but
excluding Follow Me, can be activated or deactivated at an extension on
the system by entering the authorization code for the extension on the
same system from which calls are to be forwarded. The user enters the
authorization code, then activates or deactivates the feature in the normal
fashion. This is especially useful for a single-line telephone user who
must include a Pause character in a Remote Call Forwarding dialing
sequence, because the character cannot be dialed at a single-line
telephone. It is also useful when forwarding options must be changed for
a phantom extension.
An answering device connected to an analog multiline telephone can
answer forwarded calls when Auto Answer All is turned on.
When a call is forwarded to a multiline telephone that has an Auto Dial
button programmed for the forwarding telephone, the green LED next to
the Auto Dial button does not flash.
An Auto Dial button cannot be used to dial digits for any type of Remote
Call Forwarding.
To have ARS select the facility on which to forward calls to an outside
telephone number, enter the ARS code before the telephone number. The
FRL for the call is that of the extension from which calls are being
forwarded.
When a forwarded call is answered at the destination extension, Barge-In
can be used to join the call only by dialing the extension number for the
destination (not the number for the originating extension). Barge-In
cannot be used to join a call forwarded to an outside telephone number.
Issue 1
August 1998
Page 304