Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 921

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
I Applications
Integrated Solution II
When you use AVP Automated Attendant for Night Service only, do the
following:
— If the lines/trunks set for answering by Automated Attendant appear at
— Assign the phantom extension to a Night Service group for each system
— Assign the phantom extension to a coverage group, and assign the VMI
— Specify the VMI ports that provide Automated Attendant to be
— Specify the business schedule for AVP.
Platform Requirements
You need the following equipment:
A 200-MB fixed disk if IS II includes either IVP AA or AVP.
A Master Controller, based on a 6386/SX WGS processor with UNIX
System V/386 Release 3.2.2. It includes:
— Master Controller II processor (with a 40-MB, 80-MB, or 200-MB fixed
— Monitor (monochrome or color)
— Keyboard
— Optional tape drive (required for systems with a 200-MB fixed disk for
A 355AF adapter for connecting the Master Controller to the serial port on
the control unit if they are within 50 ft. (15 m) of each other and are on the
same AC branch circuit
Asynchronous Data Units for connecting the Master Controller to the serial
port on the control unit if they are not within 50 ft. (15 m) of each other and
are not on the same AC branch unit
Any additional hardware required by each application included in IS II,
including the cables and adapters for connecting the applications to the
system. See the instruction booklet that comes with each application.
IVP4 boards
A 012 or 016 basic telephone module to provide the tip/ring interface for
IVP AA or AVP
other extensions, set the No Ring option for the other telephones.
operator position.
calling group to cover that coverage group.
Automated Attendant ports.
disk and a 3.5-in. floppy disk drive)
saving UNIX files, application program files, programming files, and
voice system files during backup)
6 5
Issue 1
August 1998
Page I-48