Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 891

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
I Applications
MERLIN MAIL and MERLIN LEGEND Mail
Platform Requirements
MERLIN MAIL Voice Messaging System
To connect the MERLIN MAIL VMS to the system, you need the following
equipment:
MERLIN MAIL VMS unit
Remote maintenance device (a modem and power supply)
Modem cable with a 9-pin connector at one end and a 25-pin connector at
the other, to connect the remote maintenance device to the serial port on
the MERLIN MAIL VMS unit
D4BU modular cords (two for a two-port system, four for a four-port
system, or six for a six-port system, plus one for the remote maintenance
device)
A 016 (T/R) or 012 module (and ring generator, if the module is an older
one that has the apparatus code 517C13, 517D13, 517E13, or 517F13).
Current 012 modules [apparatus code 517G13 (28) or higher-lettered
code] include built-in ring generators and work with all releases of the
system. Models 517A13 and 517B13 cannot be used with Release 3.0 or
later.
NOTE:
The system may require additional TTRs to allow the 012 module to handle
a large number of voice connections. Two TTRs are provided on the 012
module. Four TTRs are provided on the 016 (T/R) module. For more
information about planning TTRs, see
MERLIN LEGEND Mail Voice Messaging
To connect the MERLIN LEGEND Mail VMS to the system, you need the following
equipment:
MERLIN LEGEND Mail VMS module with 2 VMI ports, 2 TTRs, and built-in
1,200-baud remote maintenance device
MERLIN LEGEND Mail VMS detachable disk drive
A 2-port or 4-port VMI expansion card (optional)
A domestic release of the MERLIN LEGEND Communications System that
is functioning properly and has a 391A3 or newer power supply
One available slot in the control unit carrier
6 1
6 1
Table 62, page
System6 1
Issue 1
August 1998
Page I-18
I–19.