Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 509

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Paging
Pools
Primary Rate Interface
and T1
Remote Access
Service Observing
SMDR
System Access/
Intercom Buttons
System
Renumbering
Transfer
UDP Features
Voice Announce
to Busy
In Hybrid/PBX mode, line/trunk jacks used for loudspeaker paging cannot
be assigned to pools.
If the extension for an incoming PRI call matches a group paging
extension, the call is treated as an unassigned Direct Inward Dial call.
Data lines cannot be used for paging.
Loudspeaker Paging cannot be accessed from outside the system
through either DID lines or remote access.
In Release 6.1 and later systems, a Group Page call cannot be observed.
A Loudspeaker Page call cannot be observed.
Paging calls are not printed on the SMDR report.
Announcements using Speakerphone Paging can be made from a
Shared SA button. However, users cannot join a page on a Shared SA
button.
Extensions for paging groups can be renumbered. The factory-set
extensions are 793 through 799; Page All is 799.
Calls cannot be transferred either to paging groups or the loudspeaker
paging extension.
In Release 6.0 and later systems (Hybrid/PBX mode only), loudspeaker
and voice paging calls cannot be made to non-local dial plan extensions
or paging groups.
Users who program their extensions to turn off Voice Announce to Busy
(Voice Announce on MLX telephones) do not receive individual or group
speakerphone pages.
Issue 1
August 1998
Page 460