Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 355

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Forward and Follow Me
Call Waiting
Camp-On
Conference
Coverage
Call Waiting does not apply to forwarded calls because the system tries
the destination telephone instead of the forwarding telephone. However, if
the call is not forwarded for any reason (for example, because the user
has tried to use Remote Call Forwarding from a restricted telephone), Call
Waiting functions normally.
In Release 4.1 and later systems, if a user has no available SA or ICOM
buttons and has Forward or Follow Me turned on, he or she does not hear
the call-waiting tone when a call is forwarded using the Forward on Busy
enhancement. The caller hears ringback.
Camp-On cannot be used to complete a transfer to an extension that has
any type of Remote Call Forwarding turned on.
When calls received on a personal line are forwarded to an outside
telephone number, another user who shares the personal line and the
line/trunk selected to forward the call can join the in-progress call by
pressing the personal line button. In this case, the person joining the call
is considered the conference originator, and the forwarded call can be
conferenced. If the person joining the call hangs up, all participants on the
conference call are disconnected.
In Release 6.0 and later systems, if you conference a call on a Centrex
analog loop-start line when an extension has activated Centrex Transfer
via Remote Call Forwarding, the call is not forwarded.
In Release 3.0 and earlier systems, or if the Forwarding Delay is
programmed to 0 rings in Release 4.0 and later systems, when a
coverage sender forwards, calls are forwarded and sent to coverage at
the same time. Calls received on any Cover button are not forwarded.
If a coverage receiver has activated any type of Remote Call Forwarding,
calls sent to that extension by Coverage are not forwarded to the remote
location.
In Release 4.0 and later systems, one of the following occurs if both
coverage and forwarding are on and the Forwarding Delay is not set to 0
rings:
A call that is sent to Group Coverage before the forwarding attempt
is not forwarded.
A call that is remote call-forwarded before any coverage is not
covered.
A call that is remote call-forwarded while Primary and/or Secondary
Coverage receivers are alerting is removed from those coverage
points and is not sent to Group Coverage.
If a call is sent to Group Coverage after forwarding, the call is
removed from the called extension, the forwarded-to extension, and
any primary and secondary Cover buttons.
If a user tries to forward a call before the coverage interval is
reached, the call is not forwarded.
Issue 1
August 1998
Page 306