Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 425

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Integrated Administration
NOTE:
The calling group numbers and coverage group number displayed on this
screen (including any changes made) are the values used for the
information sent to the system whenever:
Therefore, if any of these group numbers must be changed, make these
changes first , before programming services or subscribers.
If it is necessary to change any calling group numbers after initial programming of
the services, make the changes in the following order:
1. Remove the affected services by deleting those services from all channels
on the System Programming/Switch Admin Form screen.
2. Change the appropriate calling group numbers on the Application Switch
Defaults screen.
3. Reinstall the affected services by adding them to channels on the System
Programming/Switch Admin Form screen.
Services are programmed on the System Programming/Switch
Admin Form screen (see
Subscribers are added to the AUDIX Voice Power coverage group
on the AUDIX Voice Power User or AUDIX Voice Power/Fax
Attendant User screen (see
Figure 26 on page 384).
Figure 24 on page
Issue 1
August 1998
Page 376
381).