Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 315

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Display
Feature Description
Inspect An MLX telephone user can
inspect the contents of
programmed buttons by
pressing the Inspct button and
then pressing the programmed
button. In most cases, the
display shows the feature or
line assigned to the button. (In
Release 2.0 and later systems,
inspecting a Last Number Dial
or Saved Number Dial button
shows the number stored on
the button.)
Users can also inspect
incoming calls or their calls on
hold. The display shows
standard call information (see
"Receiving Calls," in this table).
If a user inspects a line that
someone else is using, the
display shows that the line is in
use.
Last When a user presses a
programmed Last Number Dial
Number
button, the user sees digits on
Dial
the display as if dialing them
from the dialpad.
In Release 2.0 and later
systems, inspecting a Last
Number Dial button shows the
stored number.
Messaging When a user sends a message
to another telephone, a feedback
message appears.
When a user tries to retrieve
messages and the message box
is empty, the display indicates
that there are no messages.
Sample Displays
Analog Multiline
No display
No display
No display
No display
Issue 1
August 1998
Page 266
MLX
(outside)
(inside)