Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 385

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Group Calling
Caller ID
Call Waiting
Camp-On
Centralized Voice
Messaging
Conference
Coverage
Caller ID information appears on the display. Outgoing call information is
not displayed.
Caller ID and PRI ANI information is sent from one system to another if
PRI tandem trunks directly connect the systems. If Caller ID information is
received from the PSTN on a loop-start line, the 800 GS/LS-ID module
delay timer must be set to Yes for the information to be sent across the
private network.
Calls made to a calling group are not eligible for Call Waiting because the
call rings into the calling group's queue. However, Call Waiting can be
used for calls to individual members of the calling group. If the calling
group member is a fax machine, the call-waiting tone is not given to the
fax jack.
Users can transfer calls to a calling group by using Camp-On, but calls do
not return to the originating extension, even if not answered within the
programmed camp-on interval. If the calling group is made up of fax
machines, a call-waiting tone is not given to the fax jack when the call is
camped-on.
For Release 6.1 systems and later (Hybrid/PBX mode only), a MERLIN
LEGEND system can share the voice messaging system (VMS) of
another MERLIN LEGEND system. This sharing of the VMS is called
"Centralized Voice Messaging." See the Network Reference for more
information.
Calls waiting in the calling group queue or ringing at a calling group
member's extension cannot be added to a conference call. A user must
be connected to a calling group member before the call can be added to
the conference.
A calling group cannot be programmed as a receiver for Individual
Coverage. A coverage group can have only one calling group as a
receiver. If a calling group is programmed as a receiver for a coverage
group, it must be the only Group Coverage receiver. However, Individual
Coverage (primary and/or secondary) receivers within the calling group
can be programmed. A calling group can be a receiver for as many as 30
coverage groups.
As soon as the call is sent from the calling group queue to a calling group
member or to the delay announcement, the ringing and lit LED are
removed from the sender's extension (except for an outside call received
on a personal line).
A calling group cannot be a sender. However, a calling group member can
be a sender for Individual Coverage (Primary or Secondary) or Group
Coverage. Calls to the calling group extension number are sent only to
the calling group member's Individual Coverage receivers and not to the
Group Coverage receivers. Calls to the calling group member's individual
extension are sent to both Individual and Group Coverage receivers.
Issue 1
August 1998
Page 336