Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 677

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Speed Dial
Personal Speed Dial
Users of multiline telephones with more than ten buttons should not use Personal
Speed Dial; doing so may delete features already programmed onto buttons. To
dial a Personal Speed Dial number on a multiline telephone, press the Feature
button and dial the Personal Speed Dial code (01–24) associated with the
number. While off hook, or on an SA or ICOM button, at an analog multiline
telephone without a programmed Feature button, dial
Dial Code.
Starting with Release 1.1, when programming Personal Speed Dial numbers,
MLX-10D and MLX-5D telephone users must select
dialing the telephone number.
Single-Line Telephones
To dial a Personal Speed Dial or System Speed Dial number using a single-line
telephone, lift the handset and, while listening to inside dial tone, dial
Speed Dial code.
In Release 5.0 and later systems, the first Personal Speed Dial number (code 01)
programmed for a single-line telephone is used by the HotLine feature. This inside
or outside number is dialed automatically when a user goes off-hook at a single-
line telephone programmed as a HotLine. The Personal Speed Dial number may
be programmed at the telephone prior to its being assigned as a HotLine
extension. Once the extension is programmed as a HotLine extension,
programming at the extension can occur only once, and any further programming
for the HotLine extension must be performed through centralized programming.
Feature Interactions
Account Code Entry
Allowed/
Disallowed Lists
A System Speed Dial number or a Personal Speed Dial number can be
programmed to replace a long account number, but it cannot be
programmed to contain both an account number and a telephone number.
Single-line telephones cannot use Personal Speed Dial or System Speed
Dial to dial account codes because the
also used to terminate Account Code Entry.
A user with an outward- or toll-restricted telephone cannot dial an outside
number by using a Personal Speed Dial or System Speed Dial code
(excluding a marked System Speed Dial code), unless the number is on
an Allowed List assigned to the extension.
A user cannot dial an outside number by using Personal Speed Dial or
System Speed Dial if the number is on a Disallowed List assigned to the
extension, unless the number is dialed using a marked System Speed
Dial code.
and the Personal Speed
from the display after
Ã
4 2
4 2
required to use Speed Dial is
Issue 1
August 1998
Page 628
4 2
and the