Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 344

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Forward and Follow Me
Call Eligibility for Forwarding Features
NOTE:
In Release 6.0 and later systems, when the Centrex Transfer via Remote
Call Forwarding feature is used, only outside calls arriving on analog
Centrex loop-start lines are remote call-forwarded. (Such calls may arrive
directly at the extension or be transferred without consultation.) Centrex
Transfer via Remote Call Forwarding is an exception to many of the
eligibility rules listed below for other types of forwarding.
Forward, Remote Call Forwarding, and Follow Me send the following types of
calls:
In Release 4.1 and later systems, all inside calls when all SA or ICOM
buttons are busy
In Release 4.0 and prior systems, ringing inside calls
Inside or outside calls transferred to the forwarding extension
Outside calls directed to the forwarding extension and received on a tie
trunk
Outside calls received on a Direct Inward Dialing (DID) trunk
Outside calls received on PRI lines with routing by dial plan
For Release 6.0 or later systems (Hybrid/PBX mode only), private network
calls
An available calling group member is automatically logged out when the member
forwards his or her calls. If a calling group member logs in while calls are being
forwarded, Forward or Remote Call Forwarding is automatically canceled.
Forward, Remote Call Forwarding, and Follow Me do not send the following types
of calls:
Voice-announced inside calls
Calls received on a Cover button
Returning parked or transferred calls
Callback calls from the system
Calls received on a Shared SA button
Calls received on a Call button on a QCC
Calls transferred from a calling group for a voice messaging system (VMS)
connected to a jack programmed as generic VMI
Calls forwarded from other extensions
Issue 1
August 1998
Page 295