Show Sflow Interface; Table 486: Show Sflow Interface Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

show sflow interface

Syntax
Release Information
Description
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 486: show sflow interface Output Fields

Field Name
Interfaces
Sample-rate
Sample-limit
Polling-interval
show sflow interface show sflow interface
3602
®
OS for EX Series Ethernet Switches, Release 10.3
show sflow interface
Command introduced in Junos OS Release 9.3 for EX Series switches.
Display the interfaces on which sFlow technology is enabled and the sampling parameters.
view
show sflow on page 3599
show sflow collector on page 3601
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 3579
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 3584
show sflow interface on page 3602
Table 486 on page 3602 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Field Description
Interfaces on which sFlow technology is enabled.
Rate at which packets are sampled.
Number of packets sampled per second.
Sample limit cannot be configured and is set to 300
packets/second.
The interval at which the sFlow agent polls the interface.
Interfaces Sample-rate
ge-0/0/0.0 1:1000
show sflow interface
Adapted sample rate Polling-interval
16000 20 sec
Copyright © 2010, Juniper Networks, Inc.
command.
Level of Output
All levels
All levels
All levels
All levels