Table 42: Show Qos Shared-Shaper-Control Output Fields; Monitoring Forwarding And Drop Events On The Egress Queue - Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual

--------------------
maximum voql
reaction factor
convergence factor
minimum dynamic rate
Table 42 on page 331 lists the show qos shared-shaper-control command output
Meaning
fields.

Table 42: show qos shared-shaper-control Output Fields

Related Topics

Monitoring Forwarding and Drop Events on the Egress Queue

Display information about forwarding and drop event counts on the egress queue.
Purpose
To display events for a specific interface:
Action
host1# show egress-queue events interface gigabitEthernet 1/0
traffic
interface
---------------------- -------
ip GigabitEthernet1/0 tc1
tc2
tc3
tc4
To display events for an L2TP session:
host1#show egress-queue events l2tp-session session1
To display events for a tunnel interface, specify the interface at the root of the
scheduler hierarchy located on the tunnel-service interface or at the same hierarchy
for LNS GRE tunnel traffic:
control name value
-------
Field Name
control name
control value
units
Configuring Simple Shared Shaper Algorithm Variables on page 93
show qos-shared-shaper-control
committed
forwarded drop
class events events
--------- ---------
132
132 132
6
0
Monitoring Forwarding and Drop Events on the Egress Queue
Chapter 31: Monitoring QoS on E Series Routers
units
---------------
400 milliseconds
75 percent
50 percent
0 percent
Field Description
Name of the simple shared shaper control
Value of the simple shared shaper control; default
values are displayed if none specified
Expressed units for the value of the simple shared
shaper control
conformed exceeded
drop drop
events events
--------- ---------
0 0 0
0 0
0 132 0
0 0 132
rate
period
count
---------
132
132
132
132
331