Rep 19 Exit Roller - Xerox WORKCENTRE 3119 Service Manual

3. Release the notch attached to the Bush,
then slide the Pickup Assembly from right
to left, Figure 2.
Figure 2
4. Remove 2 screws, then the Solenoid HB
(Bypass) and Pickup Solenid HB (Pickup),
Figure 3.
Figure 3
WorkCentre 3119

REP 19 Exit Roller

Parts list on PL 3
Switch off the electricity to the machine. Dis-
connect the power cord from the customer
supply while performing tasks that do not
need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Middle Cover. (Refer to REP
8)
2. Use a screwdriver to remove the Exit
Gear and Bearing, then remove the shaft
and rollers, Figure 1.
06/06
Repairs/Adjustments
WARNING
Figure 1
4-25