Expansion Module Mac00-B41 - JVL MAC050 User Manual

4.3

Expansion module MAC00-B41

4.3.1 Expansion module MAC00-B41 — overall description.
The expansion module MAC00-B41can ONLY be mounted in the MAC400 and
newer versions of the MAC800 motor (consult JVL)
This module is among the simplest and lowest cost modules in the product range.
The modules contain no intelligence (microprocessor) meaning that all functionalety
is controlled via the basic motor.
The MAC00-B41expansion module offers an industrial interface (M12 connectors)
and a number of feature enhancements, including:
• Standard M12 connectors for optimum reliability
• Optical isolated communication covering RS232, RS485.
• Full RS232 protocol support for use with standard serial cable.
• Full RS485 protocol support for multipoint communication up to 100m.
• 6 high speed I/O channels that individually can be used as inputs or outputs. Each
channel can (when used as output) source up to 300mA.
• Dual supply. The main supply can be removed but the control circuitry is kept active
and position data and communication are still functional.
• Standard M12 connectors for optimum reliability
Typical applications for these expansion modules are:
• Closed loop systems with an overall controller involved.
• Replacement for pneumatic cylinders using the "Air Cylinder mode"
• Dispenser systems.
• Machine adjustment/setup by sending RS232 or RS485 commands.
• Standalone PLC with userprogram stored in the basic motor.
JVL Industri Elektronik A/S - User Manual - Integrated Servo Motors MAC050 - 800
MAC00-B41
seen from rear side
TT1133GB
Only MAC400&800
95