Audi Q7 2007 Repair Manual page 94

Audi Q7 2007 ➤
Heating, Ventilation and Air Conditioning - Edition 04.2013
– Disconnect the connectors -A- and -B- (connector-B- with wire
connection to the Auxiliary Heater Heating Element - Z35- ).
– Measure the resistance between the contact "1" inside the
connector -B- and the ground point -C- on the instrument panel
crossmember (for example, with the Vehicle Diagnostic Test‐
er)
Specified value: greater than 0.2 ohm and less than 5 ohm
– Measure the resistance between the contact "2" inside the
connector -B- and the ground point -C- on the instrument panel
crossmember (for example, with the Vehicle Diagnostic Test‐
er)
Specified value: greater than 0.2 ohm and less than 5 ohm
88
Rep. Gr.87 - Air Conditioning
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.