Audi Q7 2007 ➤
Heating, Ventilation and Air Conditioning - Edition 04.2013
– Remove the circlip -A-.
– Remove the drive plate -B-.
Note
Replace the circlip -A-.
♦
Clean compressor flange before sliding on drive plate.
♦
When installing the circlip -A-, note that it cannot be bent open
♦
more than is necessary for installation.
Insert the circlip -A- on proper side, the side with beveled in‐
♦
sertion edge -C- faces away from compressor (install flat side
facing compressor).
296
Rep. Gr.87 - Air Conditioning
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.