Audi Q7 2007 Repair Manual page 294

Audi Q7 2007 ➤
Heating, Ventilation and Air Conditioning - Edition 04.2013
– Install compressor with bolts -D- (and washers -E-) on to
bracket (tightening torque of bolts -D- 25 Nm), pay attention to
bushings -F- while doing this.
– Install refrigerant lines (with new, lightly oiled O-ring seals) on
to compressor
⇒ "15.3 Refrigerant Lines, Disconnecting from Compressor
and Connecting", page 250
Nm).
Note
For the dimensions of O-ring seals -B- and -C-, refer to the
♦
Parts Catalog.
The bushings -F- have different styles (different lengths),
♦
make sure to use the correct version. Refer to the Parts Cat‐
alog.
288
Rep. Gr.87 - Air Conditioning
(tightening torque of bolts -A- 20
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.