Delta MS300 Series User Manual page 138

15. PC Link
TPEditor
Download TPEditor software at Delta website. Select TPEditor version 1.60
or later. Refer to the installation instruction for TPEditor in Section 7-14-3.
1. TPEditor: This function enables you to connect the keypad to a computer
then download and edit user-defined screens.
In TPEditor, from the Communication menu, choose Write to HMI.
In the Confirm message box, click YES.
VFDSoft: This function enables you to link to the VFDSoft then upload
2.
the parameters 1–4 you have saved in the KPC-CC01.
NOTE:
If the Operation System (OS) of your computer is Windows 10, right -
click the VFDSoft icon to enter the Property. Then, click the
Compatibility tab and select the Run the program as an
administrator checkbox. (as shown in the red frames in the figure
below)
129
Chapter 7 Optional AccessoriesMS300
Press ENTER to go to Waiting to connect to PC
screen.
The software starts downloading screens to
edit to the KPC-CC01.
Download completed.