Delta MS300 Series User Manual page 528

ID No. Display on LCD Keypad
70
Action Condition
Action Time
Warning Setting Parameter
Reset Method
Reset Condition
Record
Cause
The setting address exceeds the
range (0–63)
The speed setting exceeds the
range
The address is duplicated with
other nodes on the BUS
Warning Name
ExCom ID fail
(ECid)
Action and Reset
Duplicate setting of MAC ID
Node address setting error
N/A
N/A
Correct the setting and cycle the power
N/A
N/A
Check the address setting of the communication card (Pr.09-70)
Standard: 0–2; non-standard: 0–7
Reset the address
519
Chapter 13 Warning CodesMS300
Description
Duplicate MAC ID error
Node address setting error
Corrective Actions