Key
4. Press AUTO key at RUN, and it stops the AC motor drive first (displays AHSP
5. Successful mode switching for the KPC-CC01 displays AUTO mode on the screen
NOTE: The defaults for the frequency command and operation command source of HAND / AUTO mode are both
from the keypad.
LED Function Descriptions
LED
Steady ON: STOP indicator for the AC motor drive.
Blinking: the drive is in standby.
Steady OFF: the drive does not execute the STOP command.
Operation Direction LED
1. Green light: the drive is running forward.
2. Red light: the drive is running backward.
3. Flashing light: the drive is changing direction.
Operation Direction LED under Torque Mode
1.
2.
3.
RUN LED:
Status
Blinking
CANopen–RUN
Single
Flash
warning), and switches to AUTO frequency source and AUTO operation source.
Green light: when the torque command ≥ 0, and the motor is running forward.
Red light: when the torque command < 0, and the motor is running backward.
Twinkling light: when the torque command < 0, and the motor is running forward.
LED
CANopen at initial
OFF
CANopen at pre-operation
CANopen at stopped
CANopen at operation status
ON
Chapter 7 Optional AccessoriesMS300
Descriptions
Descriptions
Condition/ State
No LED
115