Delta MS300 Series User Manual page 123

Chapter 7 Optional AccessoriesMS300
Key
ENTER Key
Goes to the next menu level. If at the last level, press ENTER to execute the command.
ESC Key
Leaves the current menu and returns to the previous menu; also functions as a return
key or cancel key in a sub-menu.
Returns to the main menu.
Menu commands:
1. Parameter Setup
2. Quick Start
3. Application Selection List
4. Changed List
5. Copy Parameter
6. Fault Record
Direction: Left / Right / Up / Down
1. In the numeric value setting mode, moves the cursor and changes the numeric
2. In the menu/text selection mode, selects an item.
Function Key
1. The functions keys have defaults and can also be user-defined. The defaults for F1
2. Other functions must be defined using TPEditor.
HAND Key
1. Use this key to select HAND mode. In this mode, the drive's parameter settings for
2. Press the HAND key at STOP, then the setting switches to the HAND frequency
3. Press HAND key at RUN, and it stops the AC motor drive first (displays AHSP
4. Successful mode switching for the KPC-CC01 displays HAND mode on the screen.
AUTO Key
1. The default of the drive is AUTO mode.
2. Use this key to select AUTO mode. In this mode, the drive's parameter settings for
3. Press the AUTO key at STOP, then the setting switches to the AUTO frequency
value.
and F4 work with the function list below. For example, F1 is the JOG function, and
F4 is a speed setting key for adding/deleting user-defined parameters.
Download TPEditor software at Delta website. Select TPEditor version 1.60 or
later. Refer to the installation instruction for TPEditor in Section 7-14-3.
frequency command source is Pr.00-30, and that for operation command source is
Pr.00-31.
source and HAND operation source.
warning), and switches to HAND frequency source and HAND operation source.
frequency command source is Pr.00-20, and that for operation command is Pr.00-
21.
source and AUTO operation source.
Descriptions
7. Language Setup
8. Time Setup
9. Keypad Locked
10. PLC Function
11. Copy PLC
12. Display Setup
114
13. Start-up Menu
14. Main Page
15. PC Link
16. Start Wizard