Delta MS300 Series User Manual page 722

API
BMOV
15
P
bit device
X Y M K
S
D
＊
n
Notes on operand usage:
n operand scope n ＝ 1 to 512
 S: Initiate source device. D: Initiate destination device. n: Send block length.
 Sends the content of n registers starting from the initial number of the device
designated by S to the n registers starting from the initial number of the device
designated by n; if the number of points referred to by n exceeds the range
used by that device, sends only points within the valid range.
 When X10 = ON, sends the content of registers D0–D3 to the four registers D20–
D23.
 When sending from designated bit devices KnX, KnY, and KnM, S and D must
have the same number of nibbles, which means n must be identical for source
and destination.
Word device
H KnX KnY KnM T
＊ ＊ ＊ ＊
＊ ＊ ＊
＊ ＊
Chapter 16 PLC Function ApplicationsMS300
Send all
16-bit command (7 STEP)
C D
BMOV Continuous
＊ ＊
execution type
＊ ＊
32-bit command
＊
－
Flag signal: none
713
BMOVP Pulse
execution type
－ － －