ID
Display on LCD Keypad
52
Action Condition
Action Time
Fault Treatment Parameter
Reset Method
Reset Condition
Record
Cause
Incorrect password input through
Pr.00-07
Fault Name
Password is locked
(Pcod)
Action and Reset
Entering the wrong password three consecutive times
Immediately act
N/A
Manual reset
Power-off
Yes
1. Input the correct password after rebooting the motor drive.
2. If you forget the password, do the following steps:
Step 1: Input 9999 and press ENTER.
Step 2: Repeat step 1. Input 9999 and press ENTER.
(You need to finish step 1 and step 2 within 10 seconds. If you don't finish
the two steps in 10 seconds, try again.)
3. The parameter settings return to the default when the "Input 9999" process
is finished.
589
Fault Descriptions
Entering the wrong password three consecutive times
Corrective Actions
Chapter 14 Fault CodesMS300