Delta MS300 Series User Manual page 221

Chapter 11 Summary of Parameter SettingsMS300
Pr. Explanation
Operation Command
00-31 Source

(HAND, LOCAL)
Digital Keypad STOP
00-32

Function
Auxiliary Frequency
00-35
Source
Master and Auxiliary
00-36
Frequency Command
Selection
Output Phase Order
00-47
Selection
Display Filter Time
00-48

(Current)
Display Filter Time
00-49

(Keypad)
00-50 Software Version (Date)
3: External UP / DOWN terminal
(multi-function input terminals)
4: Pulse input without direction command
(refer to Pr.10-16 without considering direction)
6: CANopen communication card
7: Digital keypad potentiometer knob
8: Communication card (does not include CANopen card)
9: PID controller
NOTE:
HOA (Hand-Off-Auto) function is valid only when you use with
MO function setting 41 and 56 or with KPC-CC01 (optional).
0: Digital keypad
1: External terminal
2: RS-485 communication input
3: CANopen communication card
5: Communication card (does not include CANopen card)
NOTE:
HOA (Hand-Off-Auto) function is valid only when you use with
MO function setting 41 and 56 or with KPC-CC01 (optional).
0: STOP key disabled
1: STOP key enabled
0: Master and auxiliary frequency function disabled
1: Digital keypad
2: RS-485 communication input
3: Analog input
4: External UP / DOWN key input
(multi-function input terminals)
5: Pulse input without direction command
(refer to Pr.10-16)
6: CANopen communication card
7: Digital keypad potentiometer knob
8: Communication card
0: Master + auxiliary frequency
1: Master - auxiliary frequency
2: Auxiliary - master frequency
0: Standard
1: Exchange the rotation direction
–
0.001 65.535 sec.
–
0.001 65.535 sec.
Read only
212
Settings Default
0
0
0
0
0
0.100
0.100
Read only