Chapter 7 Optional AccessoriesMS300
Copy Parameter
5.
Press ENTER to go to 001–
004 content storage
Press ENTER to enter the changed list screen.
Use the Up / Down keys to select the parameters to check or to change.
Press ENTER to enter the parameter.
Four groups of parameters are available to copy.
The steps are shown in the example below.
Example: parameter saved in the motor drive.
1. Go to Copy Parameter
2. Select the parameter group to copy and press ENTER.
1. Select 1: keypad VFD.
2. Press ENTER to go to the "keypadVFD" screen.
Begin copying parameters until it is done.
After copying is done, the keypad automatically returns to
this screen.
Example: parameter saved in the keypad.
1. Go to Copy parameter
2. Select the parameter group to copy and press ENTER.
Press ENTER to go to the "VFDkeypad" screen.
Press the Up / Down keys to select a symbol.
Press the Left / Right keys to move the cursor to select a
file name.
String & Symbol Table:
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEF
GHIJKLMNOPQRSTUVWXYZ[\]^_`abcdfghijklm
nopqrstuvwxyz{|}~
122