Delta MS300 Series User Manual page 346

03-21
AFM Analog Output Gain

Settings
 Adjusts the voltage level outputted to the analog meter from the analog signal (Pr.03-20) output
terminal AFM of the drive.
03-22
AFM Analog Output in REV Direction

Settings
03-27
AFM Output Bias

Settings
 Example 1: AFM 0–10 V is set to the output frequency, the output equation is
 Example 2: AFM 0–20 mA is set to the output frequency, the output equation is
 Example 3: AFM 4–20 mA is set to the output frequency, the output equation is
 This parameter sets the corresponding voltage of the analog output 0.
0.0–500.0%
0: Absolute value in output voltage
1: Reverse output 0 V; forward output 0–10 V
2: Reverse output 5–0 V; forward output 5–10 V
-100.00–100.00%
Chapter 12 Descriptions of Parameter SettingsMS300
337
Default: 100.0
Default: 0
Default: 0.00