Delta MS300 Series User Manual page 502

ID No. Display on LCD Keypad
25
Action Condition
Action Time
Warning Setting Parameter
Reset Method
Reset Condition
Record
Cause
The motor parameter is running
auto-tuning
Warning Name
Auto tuning
(tUn)
Action and Reset
When running Pr.05-00 motor parameter auto-tuning, the keypad displays
"tUn".
N/A
N/A
When auto-tuning is finished and no error occurs, the warning automatically
clears.
When auto-tuning is finished and no error occurs.
N/A
When the auto-tuning is finished, the warning automatically clears.
493
Chapter 13 Warning CodesMS300
Description
Parameter auto-tuning is processing.
When running auto-tuning, the keypad displays "tUn".
Corrective Actions