Delta MS300 Series User Manual page 504

ID No. Display on LCD Keypad
30
Action Condition
Action Time
Warning Setting Parameter
Reset Method
Reset Condition
Record
Cause
Keypad copy between different
power range drives
Warning Name
Copy model error 3
(SE3)
Action and Reset
"SE3" warning occurs when different drive identity codes are found during
copying parameters.
Immediately act when the error is detected
N/A
Manual reset
N/A
N/A
It is mainly to prevent parameter copies between different HP/models.
495
Chapter 13 Warning CodesMS300
Description
Keypad COPY error 3: copy model error
Corrective Actions