Delta MS300 Series User Manual page 14

1-4 Apply After Service by Mobile Device
1-4-1 Location of Service Link Label
Service link label (Service Label) is pasted on the area as the drawing below shows.
Frame A, B
Figure 1-2
1-4-2 Service Link Label
Scan QR Code to request service
1. Find the QR code sticker (as shown above).
2. Use a smartphone to run a QR Code reader APP.
3. Point your camera at the QR Code. Hold your camera steady until the QR code comes into focus.
4. Access the Delta After Service website.
5. Fill your information into the column marked with an orange star.
6. Enter the CAPTCHA and click "Submit" to complete the application.
Cannot find the QR Code?
1. Open a web browser on your computer or smartphone.
2. Enter https://service.deltaww.com/ia/repair
3. Fill your information into the columns marked with an orange star.
4. Enter the CAPTCHA and click "Submit" to complete the application.
Frame C–F
Figure 1-4
in browser address bar and press the Enter key.
5
Chapter 1 IntroductionMS300
Figure 1-3